1-component gun foam for facade joints B1

It is a moisture-curing, 1-component polyurethane adhesive foam with low expansion for bonding polystyrene insulation boards (EPS and XPS) and rock wool to various substrates.

Also recommended for use in climate alliance municipalities.

Application examples :

For the special bonding of polystyrene insulation boards (EPS) in approved external thermal insulation composite systems (ETICS).

For bonding insulation boards to facades, please be sure to refer to our separate information sheet!

For filling cavities and joints between thermal insulation boards to provide thermal insulation.

For bonding insulation boards in the area of flat roofs, perimeters, basement ceilings, facades, attics, etc.

Advantages :

Excellent adhesion to concrete, brick, plaster, wood, gypsum board, polystyrene, Styrofoam, Styrodur, rock wool, rigid PVC, bitumen, and much more (except, for example, polyethylene, silicone, PTFE, etc.). No electricity, no water, no mess. Low expansion allows for quick and secure alignment of the insulation boards. Significant weight reduction compared to conventional adhesive mortars. Compliant with ETAG 004. In Germany, building authority approval for bonding EPS insulation boards in approved external thermal insulation composite systems (ETICS) has been granted by the DIBT (German Institute for Building Technology).

Consumption : (Guideline value)

One 750 ml can is sufficient for approximately 8-10 m of facade insulation, depending on the substrate condition.

• Packaging: Can
• Contents: 750 ml
• Brand: meinl
• Series: 0750
• Packaging unit: 12 pieces