1-component mounting foam for wells

It is a climate-friendly, moisture-curing, 1-component polyurethane foam.

Also recommended for use in climate alliance municipalities.

Application examples :

Specifically for gluing concrete shaft rings with tongue and groove or tongue and groove joints.

For sealing pipe penetrations into masonry. Universally applicable for mounting, filling, insulating, and sealing.

Recommendation: The sealing surfaces must be flat; otherwise, the seal of the joint cannot be guaranteed by the well foam. If necessary, the shaft ring connection should also be sealed with “Meinl WasserDicht”.

Advantages :

Certified quality. Simplifies and shortens the work process. Creates perfect connections.

Resistant to gasoline, oil and water, as well as to all acids and bacteria normally found in the soil.

High foam yield and excellent adhesive strength.

Adheres excellently to concrete, brick, plaster, polystyrene, rigid PVC and much more (except for e.g. polyethylene, silicone rubber and similar materials).

Consumption : (Guideline value)

One 750 ml can is sufficient for approximately 3-4 manhole rings with a diameter of approximately 1 m.

• Packaging: Can
• Contents: 750 ml
• Brand: meinl
• Packaging unit: 12 pieces