PRCD-S Mobile Safety Distributor – Solid Rubber / RIED Series

• Safety distributor solid rubber 400 V / 16 A with NM5P
• PCE solid rubber distributor housings are made from a natural rubber-styrene-butadiene mixture (NK/SBR)
• PRCD-S 3-phase protective switchgear with comprehensive personal protection
• The microprocessor-controlled network monitor NM5p is used to monitor phase, neutral and protective conductors of 5-pole 400V plug-in devices in TT & TN power supply networks
• PRCD-S protective device: When properly installed with residual current devices and contactors, the NM5p provides reliable protection against electrical accidents caused by faults on the power supply side (e.g., incorrectly wired plugs and sockets).
• The NM5p cannot be switched on or switches off if: phase error, neutral conductor missing or carrying voltage to protective conductor, protective conductor interrupted or carrying voltage to measuring reference, protection against automatic restart
• Dimensions: Height 280 mm / Width 235 mm / Depth 285 mm

Technical data:

Entrance:

• 2 m cable H07RN-F 5G2.5 mm with plug 16 A 5p 400 V

Exit:

• 1 x CEE socket 16 A 5p 400 V protected by pre-fuse supply line
• 3 x earthed sockets 16 A 250 V IP54 protected by pre-fuse supply line

Insurance:

• 1 x FI 40 A / 4 / 0.03 A (TYPE A 25AT) across all outputs
• 1 x NM5p protective device 5-phase system PCE control electronics for monitoring the 5-pin power supply on the supply side
• 2 x load contactor 12.5kW AC3 to switch off the outputs

• Color: black
• Case material: rubber
• Cable length: 2 m
• Cable type: H07RN-F 5G2.5
• Brand: PCE
• Protection class: IP54